Electrospinning is a straightforward method to produce micro/nanoscale fibers from polymer solutions typically using an operating voltage of 10 kV–30 kV and spinning distance of 10 cm–20 cm. In this paper, polyvinyl pyrrolidone (PVP) non-woven nanofibers with diameters of 200 nm–900 nm were prepared by low-voltage near-field electrospinning with a working voltage of less than 2.8 kV and a spinning distance of less than 10 mm. Besides the uniform fibers, beaded-fibers were also fabricated and the formation mechanism was discussed. Particularly, a series of experiments were carried out to explore the influence of processing variables on the formation of near-field electrospun PVP nanofibers, including concentration, humidity, collecting position, and spinning distance.
Electrospinning is a straightforward method to produce micro/nanoscale fibers from polymer solutions typically using an operating voltage of 10 kV–30 kV and spinning distance of 10 cm–20 cm. In this paper, polyvinyl pyrrolidone (PVP) non-woven nanofibers with diameters of 200 nm–900 nm were prepared by low-voltage near-field electrospinning with a working voltage of less than 2.8 kV and a spinning distance of less than 10 mm. Besides the uniform fibers, beaded-fibers were also fabricated and the formation mechanism was discussed. Particularly, a series of experiments were carried out to explore the influence of processing variables on the formation of near-field electrospun PVP nanofibers, including concentration, humidity, collecting position, and spinning distance.
In this paper, electromagnetic poly(3,4-ethylenedioxythiophene)/γ-Fe2O3 (PEDOT/γ-Fe2O3 ) micro-bowls, 1 2 μm in diameter, were prepared by a simple environment-friendly process. In this method, the aqueous solution of cetyltrimethylammonium bromide (CTAB) instead of any organic solvent was used. FeCl3 acted as a source of Fe Ⅲ for the formation of γ-Fe2O3 and as an oxidant for the polymerization of 3,4-ethylenedioxythiophene (EDOT). The bowl-shaped morphology of PEDOT/γ-Fe2O3 composites was strongly influenced by the concentration of CTAB, FeCl2 , ammonia solution and the reaction temperature. The saturation magnetization of PEDOT/γ-Fe2O3 micro-bowls increased with the increase of FeCl2 concentration and reached 6.20 Am2 /kg at the FeCl2 concentration of 0.30 mol/L. The conductivity of the PEDOT/γ-Fe2O3 composites was in the range of 101 S/cm. The electrical and magnetic sources of PEDOT/γ-Fe2O3 micro-bowls were confirmed by SEM-EDX, TEM, XRD and XPS spectra. And the possible formation mechanism of PEDOT//γ-Fe2O3 was proposed.
