【目的】研究木材胶合界面的静态和动态力学行为,探讨树脂渗透对木材管胞壁层力学性能的影响,为木质复合材料制造工艺优化和增强改性提供理论依据。【方法】采用纳米压痕静态和动态力学测试技术(Nano-DMA),对针叶材火炬松与酚醛树脂(PF)、脲醛树脂(UF)胶黏剂所形成胶合界面区域各相材料的静态弹性模量、硬度、蠕变性能以及储能模量和损耗模量等力学行为进行分析。【结果】静态力学行为方面,在界面区域,PF和UF渗透进入管胞壁层后,木材管胞壁的弹性模量( E r)和硬度( H )提高;经PF渗透后,木材管胞壁的 E r和 H 分别增加7%和26%;Burgers蠕变力学模型可有效描述胶合界面区域管胞壁的纳米压痕蠕变特性,经树脂渗透后,木材管胞壁的瞬时弹性模量增加,黏弹性模量和黏性系数减小;在保载初期,PF界面区域木材管胞壁的蠕变柔量约下降60%,UF界面区域木材管胞壁的蠕变柔量约下降58%。动态力学行为方面,随着加载频率增加,界面材料的储能模量( E ′ r)逐渐增大,而损耗模量( E ″ r)和损耗因子(tan δ)呈减小趋势;当加载频率为10 Hz时,PF和UF树脂渗透使得管胞壁层的储能模量分别增加16%和29%。【结论】胶合界面区域胶黏剂进入管胞壁层,对木材管胞的静态力学性能具有增强作用,同时胶黏剂可提高管胞壁的短期抗蠕变能力;木材管胞壁具有较高的储能模量和损耗模量,而树脂的储能模量和损耗模量较低,经树脂渗透后,木材管胞壁的储能模量增加,但损耗模量和损耗因子呈下降趋势,可能对界面传递和分散应力产生不利影响。
High-efficiency blue electrophosphorescent organic light-emitting devices employing MoO 3 used as hole injection layer(HIL) and MoO 3 doped N,N-dicarbazoly-3,5-benzene(mCP) as hole transport layer(HTL) were demonstrated. The blue OLED with the novel anode structure and TAPC used as electron blocking layer show a low turn-on voltage of 2.4 V, a maximum power efficiency of 33.6 lm/W at 3.1 V and 25 lm/W with 1 000 cd/m2at 3.8 V. It is also found that the efficiency of the devices is dependent on the different EBL materials. This is may because of relationship with the charge mobility and the triplet energy level of EBL materials. The device efficiency is determined by the charge balance which plays an important role.
