Abilities of agricultural waste materials (walnut shell-WS, rice husk-RH, and peanut hull-PH) were tested as adsorbents for the adsorption of Cr(Ⅵ) from aqueous solution. Batch adsorption experiments were carried out to study the adsorption kinetics mechanism of Cr(Ⅵ) effect of adsorbent dosage, pH, contact time, and temperature. The best results are obtained at 15g/L adsorbent concentration, 60min contact time, 298K temperature, and 50mg/L adsorbate initial concentration at pH 2. The adsorption isotherms, using initial concentrations of Cr(Ⅵ) between 10 and 500mg/L for the Cr(Ⅵ) removal, show the maximum metal uptake capacities of adsorbent were 10.48, 6.71, and 8.54mg/g for WS, RH, and PH, respectively. And the adsorption data fitted well to the Langmuir adsorption isotherm for WS, RH, and PH with correlation coefficients of 0.9862, 0.9723, and 0.9714, respectively. Moreover, the FTIR analysis of WS, RH, and PH before and after adsorption of Cr(Ⅵ) suggested that Cr ions were combined to some functional groups of compounds contained in these materials.
The isotopic composition of dissolved inorganic carbon(DIC) in estuarine environments has been studied for its significant role in determining the isotopic composition of inorganic/organic matter and its applications to the study of various natural processes. In this paper, based on the stable isotope geochemical characteristics of dissolved inorganic carbon in the Jiulong River Estuary, the following conclusions are drawn:(1) δ13CDIC values are mainly controlled by the mixing ratio of fresh water and sea water;(2) δ13Cphytoplankton values are linearly related to the δ13CDIC values;(3) δ13CPOM values for the Jiulong River Estuary are affected by anthropogenic pollution significantly; and(4) the comprehensive analysis of δ13Cphytoplankton, δ13CPOM and δ13CDIC shows that along with increasing salinity, the proportion of POM derived from the degradation of phytoplanktons gradually increases.
In the present work, a novel heterogeneous photo-Fenton catalyst was prepared by iron and cerium pillared bentonite. The catalyst Fe-Ce/bentonite was characterized by X-ray diffraction （XRD）, X-ray fluorescence （XRF）, Brunauer-Emmett-Teller （BET） and scanning electron microscopy （SEM） methods. It is found that Fe and Ce intercalate into the silicate layers of bentonite successfully. Tetracycline was removed by heterogeneous photo-Fenton reaction using the catalyst in this work. The effects of different reaction systems, hydrogen peroxide concentration, initial pH, catalyst dosage, UV power and introduction of different anions on degradation were investigated in details. The stability of catalyst was investigated through recycling experiment. The results show that removal rate of tetracycline is 98.13% under the conditions of 15 mmol/L H202, 0.50 g/L catalyst dosage, initial pH 3.0, 11 W UV lamp power and 60 min reaction time. However, the removal rate decreases after adding some anions. The hydroxyl radical plays an important role in heterogeneous photo-assisted Fenton degradation of tetracycline. The catalyst is very stable and can be recycled many times.
