在Q235A基体上采用药芯焊丝埋弧焊和自保护明弧焊方式,依次堆焊包含"20Cr2Mn12Ni Mo N韧性过渡层+Cr12W3Mn塑性缓冲层+Cr20Ti Mn Si高铬耐磨层"结构的堆焊合金。借助光学显微镜、扫描电镜、X线衍射仪和显微硬度计等研究堆焊合金层的界面组织特征及性能。结果表明,增加韧性过渡层和塑性缓冲层形成了梯度硬度结构的堆焊合金层,不仅可减小残余应力,而且抑制母材成分的稀释影响,规避网状碳化物和共晶等脆性组织形成。
Porous Al-Mg alloys with different nominal compositions were successfully fabricated via elemental powder reactive synthesis, and the phase composition, pore structure, and corrosion resistance were characterized with X-ray diffractometer, scanning electron microscope and electrochemical analyzer. The volume expansion ratio, open porosity and corrosion resistance in 3.5%(mass fraction) Na Cl aqueous solution of the alloys increase at first and then decrease with the increase of Mg content. The maxima of volume expansion ratio and open porosity are 18.3% and 28.1% for the porous Al-56%Mg(mass fraction) alloy, while there is the best corrosion resistance for the porous Al-37.5% Mg(mass fraction) alloy. The pore formation mechanism can be explained by Kirkendall effect, and the corrosion resistance can be mainly affected by the phase composition for the porous Al-Mg alloys. They would be of the potential application for filtration in the chloride environment.
