Lithium-sulfur(Li-S) batteries belong to one of the promising technologies for high-energy-density rechargeable batteries.However,sulfur cathodes suffer from inherent problems of its poor electronic conductivity and the shuttling of highly dissoluble lithium polysulfides generated during the cycles.Loading sulfur into porous carbons has been proved to be an effective approach to alleviate these issues.Mesoporous and microporous carbons have been widely used for sulfur accommodation,but mesoporous carbons have poor sulfur confinement,whereas microporous carbons are impeded by low sulfur loading rates.Here,a core-shell carbon,combining both the merits of mesoporous carbon with large pore volume and microporous carbon with effective sulfur confinement,was prepared by coating the mesoporous CMK-3 with a microporous carbon(MPC) shell and served as the carbon host(CMK-3 @MPC) to accommodate sulfur.After sulfur infusion,the as-obtained S/(CMK-3@MPC) cathode delivered a high initial capacity of up to 1422 mAh·g^(-1) and sustained 654 mAh·g^(-1) reversible specific capacity after 36 cycles at 0.1 C.The good performance is ascribed to the unique core-shell structure of the CMK-3@MPC matrix,in which sulfur can be effectively confined within the meso/microporous carbon host,thus achieving simultaneously high electrochemical utilization.
The kesterite Cu2ZnSn(S,Se)4(CZTSSe) is an ideal candidate for light harvesting materials in earth-abundant low-cost thinfilm solar cells(TFSC). Although the solution-based processing is a most promising approach to achieve low-cost solar cells with high power conversion efficiency, the issues of poor crystallinity and carbon residue in CZTSSe thin films are still challenging. Herein, a non-hydrazine solution-based method was reported to fabricate highly crystallized and carbon-free kesterite CZTSSe thin films. Interestingly, it was found that the synthetic atmosphere of metal organic precursors have a dramatic impact on the morphology and crystallinity of CZTSSe films. By optimizing the processing parameters, we were able to obtain a kesterite CZTSSe film composed of compact large crystal grains with trace carbon residues. Also, a viable reactive ion etching(RIE) processing with optimized etching conditions was then developed to successfully eliminate trace carbon residues on the surface of the CZTSSe film.
ZOU YuGangLIU JieZHANG XingJIANG YanHU JinSongWAN Li-Jun
