The average-passage equation system (APES) provides a rigorous mathematical framework for accounting for the unsteady blade row interaction through multistage compressors in steady state environment by introducing deterministic correlations (DC) that need to be modeled to close the equation system.The primary purpose of this study was to provide insight into the DC characteristics and the influence of DC on the time-averaged flow field of the APES.In Part 2 of this two-part paper,the influence of DC on the time-averaged flow field was systematically studied.Several time-averaging computations were conducted with various boundary conditions and DC for the downstream stator in a transonic compressor stage,by employing the CFD solver developed in Part 1 of this two-part paper.These results were compared with the time-averaged unsteady flow field and the steady one.The study indicated that the circumferentialaveraged DC can take into account major part of the unsteady effects on spanwise redistribution of flow fields in compressors.Furthermore,it demonstrated that both deterministic stresses and deterministic enthalpy fluxes are necessary to reproduce the time-averaged flow field.
The average-passage equation system (APES) provides a rigorous mathematical framework for accounting for the unsteady blade row interaction through multistage compressors in steady state environment by introducing deterministic correlations (DC) that need to be modeled to close the equation system.The primary purpose of this study is to provide insight into the DC characteristics and the influence of DC on the time-averaged flow field of the APES.In Part 1 of this two-part paper,firstly a 3D viscous unsteady and time-averaging flow CFD solver is developed to investigate the APES technique.Then steady and unsteady simulations are conducted in a transonic compressor stage.The results from both simulations are compared to highlight the significance of the unsteady interactions.Furthermore,the distribution characteristics of DC are studied and the DC at the rotor/stator interface are compared with their spatial correlations (SC).Lastly,steady and time-averaging (employing APES with DC) simulations for the downstream stator alone are conducted employing DC derived from the unsteady results.The results from steady and time-averaging simulations are compared with the time-averaged unsteady results.The comparisons demonstrate that the simulation employing APES with DC can reproduce the time-averaged field and the 3D viscous time-averaging flow solver is validated.
