The customized beam phase measurement system can meet the requirement of beam loss control of the radio-frequency quadrupole(RFQ).However,its read-out part cannot satisfy the requirement of China Spallation Neutron Source(CSNS).CSNS uses the Experimental Physics and Industrial Control System(EPICS) as its control system.So it is necessary to develop the EPICS read-out system consisting of EPICS IOC databases,driver support and OPIs.The new system has been successfully tested in the RFQ.In the future,it will be applied to the beam diagnostics of CSNS.
Design and construction of the first prototype ionization chamber for CSNS and Proton Accelerator (PA) beam loss monitor (BLM) system is reported. The low leakage current (<0.1 pA), good plateau (≈800 V) and linearity range up to 200 Roentgen/h are obtained in the first prototype. All of these give us good experience for further improving the ionization chamber construction.
Based on the first ionization chamber (IC) prototype, the structure, working gas component and electrode material of the IC are improved. The test of the improved IC shows that the plateau length is about 2000 V, the plateau slope is less than 0.2%/100 V, the sensitivity is 19.6 pA/rad·h 1, the up-limitation of the linearity can be up to 3.6×105 rad/h, and the applied voltage can be operated to 3500 V. The test results show that the performance of the improved IC meets the requirements of the beam loss monitor.
