As a model bcc metal, tantalum and its alloys have wide applications in defense-related fields. The KHL (Khan, Huang, Liang, 1999) model and the constitutive model proposed by Nemat-Nasser et al (Nemat-Nasser and Kapoor, 2001) for tantalum and its alloys were analyzed and compared with each other. A set of published data recorded during elastic-plastic deformations of tantalum, tantalum alloy containing tungsten of 2.5% (Ta-2.5W), over a wide range of strains, strain rates, and temperatures were used to correlate the two models. Overall, it can be concluded that KHL model correlates much better with the data than the model used by Nemat-Nasser et al.
To completely understand the rate-dependent stress-strain behavior of the porous nanocrystalline materials,it is necessary to formulate a constitutive model that can reflect the complicated experimentally observed stress-strain relations of nanocrystalline materials.The nanocrystalline materials consisting grain interior and grain boundary are considered as viscoplastic and porous materials for the reasons that their mechanical deformation is commonly governed by both dislocation glide and diffusion,and pores commonly exist in the nanocrystalline materials.A constitutive law of the unified theory reflecting the stress-strain relations was established and verified by experimental data of bulk nanocrystalline Ni prepared by hydrogen direct current arc plasma evaporation method and hot compression.The effect of the evolution of porosity on stress-strain relations was taken into account to make that the predicted results can keep good agreements with the corresponding experimental results.
