A V4Ti alloy and several V4Cr4Ti alloys with different oxygen contents were studied on their tensile properties with the effect of hydrogen concentrations. The ductility of the alloys showed a successive decrease in a varied rate with an increased hydrogen concentration, while the ultimate tensile strength remained unchanged or even decreased for the high oxygen content alloy in spite of the occurrence of hardening in the low oxygen content alloy. Oxygen in the alloy causes grain boundary weakening, increasing the possibility of intergranular fractures and thus enhancing the hydrogen embrittlement. V4Ti showed a higher resistance to the hydrogen embrittlement as compared to the V4Cr4Ti alloys on a similar oxygen content level.
Oxidation experiment was performed in air at elevated temperature for three kinds of vanadium alloys. The features of the oxides and the role of the alloying elements were analyzed. All specimens exhibited a parabolic kinetic behavior of weight gain with the exposure time. The alloys can't be used in air at the temperature over 700℃, below which, V4Ti3A1 showed a much lower oxidation rate than the V4Cr4Ti alloy. It was found that A1 in the alloy was segregated to the specimen surface in the process, and formed into Al2O3 on the surface, hence decreasing the formation of V2O5. The oxides on the surface were nucleated in a small number density and grew to a large size, giving more protection to the matrix alloy.
