The rotating packed bed(RPB) with split packing is a novel gas–liquid contactor, which intensifies the mass transfer processes controlled by gas-side resistance. To assess its efficacy, the mass transfer characteristics with adjacent rings in counter-rotation and co-rotation modes in a split packing RPB were studied experimentally.The physical absorption system NH3–H2O was used for characterizing the gas volumetric mass transfer coefficient(kyae) and the effective interfacial area(ae) was determined by chemical absorption in the CO2–NaO H system. The variation in kyaeand aewith the operating conditions is also investigated. The experimental results indicated that kyaeand aefor counter-rotation of the adjacent packing rings in the split packing RPB were higher than those for co-rotation, and both counter-rotation and co-rotation of the split packing RPB were superior over conventional RPBs under the similar operating conditions.
A new continuous process for preparing methanol-diesel emulsified fuel with an Impinging Stream-Rotating Packed Bed is proposed. The droplet size of dispersed phase(methanol) of the emulsified fuel has a significant effect on the combustion of methanol-diesel emulsified fuel. In this paper, the methanol-diesel emulsified fuel uses diesel as the continuous phase and methanol as the dispersed phase. The Sauter mean diameter of the dispersed phase of methanol-diesel emulsified fuel was characterized with microphotography and arithmetic method. The experimental result showed that the Sauter mean diameter of the dispersed phase, which was decreased with the augmentation of the high gravity factor, liquid flow rate and emulsifier dosage, was inversely proportional to the methanol content. The Sauter mean diameter of the dispersed phase can be controlled and adjusted in the range of 12—40 μm through the change of operating conditions. The correlative expressions of the Sauter mean diameter of emulsified fuel were obtained and the calculated values agreed well with the experimental values.
Hydrophobic magnesium hydroxide(MH) nanoparticles were prepared by a one-step synthesis method in a high-gravity environment generated by a novel impinging stream–rotating packed bed(IS-RPB) reactor. The reactant solutions were simultaneously and continuously pumped into the IS-RPB reactor, and then Tween80 was added as a surface modifier. The morphology, structure, and properties of blank and hydrophobic MH were characterized. The effects of MH nanoparticles on the flame retardancy, thermal stability, and mechanical properties of PP/MH composites were also studied. We found that the obtained MH nanoparticles exhibited hexagonal lamella with a mean size of 30 nm, excellent hydrophobic properties(e.g., high water contact angle of 112°), and improved thermal stability of MH. The limiting oxygen index(LOI) further showed that increased MH loading can significantly improve flame-retardant performance, which reached 29.3% for PP/MH composites with 30 wt% hydrophobic samples. The thermal stability and mechanical properties of the PP/MH composites with hydrophobic samples were also much higher than those of PP/MH composites with blank MH. Results showed that the one-step synthesis had high potential application in the large-scale production of hydrophobic MH nanoparticles.
