An analytical phase transformation model has been used to study the kinetics of crystallization of amorphous alloys sub- jected to either isothermal or isochronal anneals. The model has been applied to Mg82.3Cu17.7 and Pd40Cu30P20Ni10, employing iso- thermal and isochronal differential scanning calorimetry. Applying different combinations of nucleation and growth mechanisms to the same experiments, the nucleation and growth modes dominating the crystallization and the values for the corresponding kinetic parameters, including the constant activation energies for nucleation and growth, have been determined. Further, the influence of isothermal pre-annealing on subsequent isochronal crystallization kinetics, involving a gradual change of nucleation mode up to site saturation with increase of pre-annealing, can be analyzed.
Feng Liu, Changlin Yang, Wei Yang, Gencang Yang, and Yaohe Zhou State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China
A solute trapping model is developed based on a so-called solute drag treatment.By adopting a basic approach of phase-field models,and defining the free energy density in the interfacial region,a suitable interface shape function is introduced to derive the current model,in which the equilibrium and non-equilibrium interface behaviours can be described using a dimensionless parameter L (i.e.an important parameter in the present interface shape function).When applying the current model to Si-9%As (molar fraction) alloy with L=0.5,a good prediction of the steeper profile for high interface velocity,which is analogous to that using a phase-field model of DANILOV and NESLTER,has been obtained.
On the base of nonlinear liquidus and solidus,an extended model for dendrite growth in bulk undercooled melts was developed under local non-equilibrium conditions both at the interface and in the bulk liquid.In terms of thermodynamic calculations of the phase diagram,the model predictions are relatively realistic physically,since few fitting parameters are used in the model predictions.Adopting three characteristic velocities,i.e.the critical velocity of absolute solute stability(VC*),the velocity of maximal tip radius(VRm),and the velocity of bulk liquid diffusion(VD),a quantitative agreement is obtained between the model predictions and the experimental results in undercooled Ni-0.7%B and Ni-1%Zr(molar fraction) alloys,and the overall solidification process can be categorized.
Through phase transformation kinetic analysis and experimental observation,the δ/γtransformation occurring in the non-equilibrium peritectic Fe-4.33at.%Ni alloys was systematically investigated.According to JMA solid-state transformation ki-netic theory,the Time-Temperature-Transformation(TTT)curves of the δ/γtrans-formation in peritectic Fe-Ni alloy were calculated.On this basis,the physical cor-relation between the δ/γtransformation and the initial undercooling of melt(T)was elucidated.The results indicate that the change of T can alter not only the overall δ/γtransformation pathways but also the transformation fraction with re-spect to each transformation mechanism.
