In the present paper, closed form singular solutions for an infinite anisotropic plate with an elliptic hole or crack are derived based on the Stroh-type formalism for the general anisotropic plate. With the solutions, the hoop stresses and hoop moments around the elliptic hole as well as the stress intensity factors at the crack tip under concentrated in-plane stresses and bending moments are obtained. The singular solutions can be used for approximate analysis of an anisotropic plate weakened by a hole or a crack under concentrated forces and moments.They can also be used as fundamental solutions of boundary integral equations in BEM analysis for anisotropic plates with holes or cracks under general force and boundary conditions.
Stroh-type formalisms for anisotropic thin plates in literature are reviewed and dis- cussed,and two kinds of hybrid Stroh-type formalisms are compared.It is seen that the two Stroh- type formalisms are essentially equivalent.With simple transfer relations,they can be expressed each other.In addition,with properly defined notation systems,the two Stroh-type formalisms can also be written in unified forms,which will be convenient in applications.
A multi-variable non-singular boundary element method (MNBEM) is presented for 2-D potential problems. This method is based on the coincident collocation of non-singular boundary integral equations (BIEs) of the potential and its derivatives, where the nodal potential derivatives are considered independent of the nodal potential and flux. The system equation is solved to determine the unknown boundary potentials and fluxes, with high accuracy boundary nodal potential derivatives obtained from the solution at the same time. A modified Gaussian elimination algorithm was developed to improve the solution efficiency of the final system equation. Numerical examples verify the validity of the proposed algorithm.
