Bulk metallic glass (BMG) composites with the austenite B2 phase as reinforcement macroscopically showed strain hardening behavior due to the plasticity induced by martensitic transformation during deformation. Relationship between characteristics of the B2-CuZr reinforcing phase and uniaxial compressive properties of CuZr-based BMG composites was studied. Mechanical properties of these BMG composites were found to depend on not only the reinforced phases but also the amorphous matrix,and the yield and fracture strength can be roughly estimated by the rule of mixture principle. Distribution of the reinforced B2-CuZr phase has an important impact on the compressive plasticity even for the composites with a similar volume fraction of the crystalline phase.
The glass transition behavior of La55A125-Ni10CU10 bulk metallic glass was investigated using elec-trical resistivity and differential-scanning calorimetry measurements. There are good agreements of the onset temperature （Tg-onset） and the end temperature （Tg-end） of the glass transition between the DSC curve and tempera-ture dependent electrical resistivity （TER） curve in the same heating rate. Kinetics of the glass transition is studied with the electrical resistivity data. The apparent activation energy of the glass transition （△Eg） is found to be 306.4 kJ.mol^-1. Fragility parameter D^＊ and VFT temper-ature To are 9.8 and 324.9 K, respectively.
