A simple design procedure is used to generate photonic crystal fibers （PCFs） with ultra-flattened chromatic dispersion. Only four parameters are required, which not only considerably saves the computing time, but also distinctly reduces the air-hole quantity. The influence of the air-hole diameters of each ring of hexagonal PCFs （H-PCF, including 1-hole-missing and 7-hole-missing H-PCFs）, circular PCFs （C-PCF）, square PCFs （S-PCF）, and octagonal PCFs （O-PCF） is investigated through simulations. Results show that regardless of the cross section structures of the PCFs, the 1st ring air-hole diameter has the greatest influence on the dispersion curve followed by that of the 2nd ring. The 3rd ring diameter only affects the dispersion curve within longer wavelengths, whereas the 4th and 5th rings have almost no influence on the dispersion curve. The hole-to-hole pitch between rings changes the dispersion curve as a whole. Based on the simulation results, a procedure is proposed to design PCFs with ultra-flattened dispersion. Through the adjustment of air-hole diameters of the inner three rings and hole-to-hole pitch, a flattened dispersion of 0±0.5 ps/（nm·km） within a wavelength range of 1.239 – 2.083 μm for 5-ring 1-hole-missing H-PCF, 1.248 – 1.992 μm for 5-ring C-PCF, 1.237 – 2.21 μm for 5-ring S-PCF, 1.149 – 1.926 μm for 5-ring O-PCF, and 1.294 – 1.663 μm for 7-hole-missing H-PCF is achieved.
随着三网融合的具体实施,用户对带宽的需求不断提升,10 G EPON作为下一代宽带接入技术备受关注。10 G EPON具备高带宽、大分光比、长距离的特点,满足"三网融合"后以视频业务为主的高带宽发展需求,满足FTTH、FTTB、FTTO、FTTN各种高带宽需求的应用场景,从10 G EPON的进展情况、10 G EPON的关键技术及其实际应用等几个方面进行了分析。
