Based on the nonlinear failure criterion and the upper bound theorem, the modified tangential technique method was proposed to derive the expression of supporting pressure acting on shallow tunnel. Instead of the same stress state, different normal stresses on element boundaries were used. In order to investigate the influence of different factors on supporting pressures, the failure mechanism was established. The solution of supporting pressure, with different parameters, was obtained by optimization theory. The corresponding failure mechanism and numerical results were presented. In comparison with the results using the single tangential technique method, it is found that the proposed method is effective, and the good agreement shows that the present solution of supporting pressure is reliable.
The proliferation of Hoek-Brown nonlinear failure criterion and upper bound theorem makes it possible to evaluate the stability of circular tunnels with an original curved collapsing mechanism. The arch effect of shallow circle tunnel is not taken into consideration so that the mechanical characteristics can be easily described. Based on the mechanism, the upper bound solution of supporting pressure of tunnels under the condition of surface settlements and overloads on the ground surface is derived. The objective function is formed from virtual work equations under the variational principle, and solutions are presented by the optimum theory. Comparisons with previous works are made. The numerical results of the present method show great agreement with those of existing ones. With regard to the surface settlement and overloads, the influence of different rock parameters on the collapsing shape is analyzed.
The nonlinear Hoek-Brown failure criterion was introduced to limit analysis by applying the tangent method. Based on the failure mechanism of double-logarithmic spiral curves on the face of deep rock tunnels, the analytical solutions of collapse pressure were derived through utilizing the virtual power principle in the case of pore water, and the optimal solutions of collapse pressure were obtained by using the optimization programs of mathematical model with regard of a maximum problem. In comparison with existing research with the same parameters, the consistency of change rule shows the validity of the proposed method. Moreover, parametric study indicates that nonlinear Hoek-Brown failure criterion and pore water pressure have great influence on collapse pressure and failure shape of tunnel faces in deep rock masses, particularly when the surrounding rock is too weak or under the condition of great disturbance and abundant ground water, and in this case, supporting measures should be intensified so as to prevent the occurrence of collapse.
The analytical solutions for predicting the exact shape of collapse mechanisms in shallow tunnels with arbitrary excavation profiles were obtained by virtue of the upper bound theorem of limit analysis and variation principle according to Hoek-Brown failure criterion. The seepage force was included in the upper bound limit analysis, and it was computed from the gradient of excess pore pressure distribution. The seepage was regarded as a work rate of external force. The numerical results of roof collapse in square and circular tunnels with different rock parameters were derived and discussed, which proves to be valid in comparison with the previous work. The influences of different parameters on the shape of collapsing blocks were also discussed.
To analyze the stability of a shallow square tunnel, a new curved failure mechanism, representing the mechanical characteristics and collapsing form of this type of tunnel, is constructed. Based on the upper bound theorem of limit analysis and the Hoek-Brown nonlinear failure criterion, the supporting pressure derived from the virtual work rate equation is regarded as an objective function to achieve optimal calculation. By employing variational calculation to optimize the objective function, an upper bound solution for the supporting pressure and the collapsing block shape of a shallow square tunnel are obtained. To evaluate the validity of the failure mechanism proposed in this paper, the solutions computed by the curved failure mechanism are compared with the results calculated by the linear multiple blocks failure mechanism when the Hoek-Brown nonlinear failure criterion is converted into the Mohr-Coulomb linear criterion. The influences of rock mass parameters on the supporting pressure and collapsing block shape are discussed.
On the basis of upper bound theorem, non-associated flow rule and non-linear failure criterion were considered together.The modified shear strength parameters of materials were obtained with the help of the tangent method. Employing the virtual power principle and strength reduction technique, the effects of dilatancy of materials, non-linear failure criterion, pore water pressure,surface loads and buried depth, on the stability of shallow tunnel were studied. In order to validate the effectiveness of the proposed approach, the solutions in the present work agree well with the existing results when the non-associated flow rule is reduced to the associated flow rule and the non-linear failure criterion is degenerated to the linear failure criterion. Compared with dilatancy of materials, the non-linear failure criterion exerts greater impact on the stability of shallow tunnels. The safety factor of shallow tunnels decreases and the failure surface expands outward when the dilatancy coefficient decreases. While the increase of nonlinear coefficient, the pore water pressure coefficient, the surface load and the buried depth results in the small safety factor. Therefore, the dilatancy as well as non-linear failure criterion should be taken into account in the design of shallow tunnel supporting structure. The supporting structure must be reinforced promptly to prevent potential mud from gushing or collapse accident in the areas with abundant pore water, large surface load or buried depth.
