您的位置: 专家智库 > >

国家自然科学基金(50674021)

作品数:2 被引量:1H指数:1
相关作者:苏志坚赫冀成陈进更多>>
相关机构:东北大学瑞典皇家工学院更多>>
发文基金:国家自然科学基金高等学校学科创新引智计划更多>>
相关领域:冶金工程化学工程金属学及工艺更多>>

文献类型

  • 2篇期刊文章
  • 1篇会议论文

领域

  • 2篇冶金工程
  • 1篇化学工程
  • 1篇金属学及工艺
  • 1篇机械工程

主题

  • 1篇低碳钢
  • 1篇电磁
  • 1篇电磁场
  • 1篇动力学
  • 1篇动力学研究
  • 1篇冶金
  • 1篇液态
  • 1篇液态金属
  • 1篇枝晶
  • 1篇枝晶间距
  • 1篇碳钢
  • 1篇凝固
  • 1篇凝固过程
  • 1篇晶间
  • 1篇固相率
  • 1篇二次枝晶
  • 1篇二次枝晶间距
  • 1篇RATE
  • 1篇SLAG
  • 1篇ELECTR...

机构

  • 2篇东北大学
  • 1篇瑞典皇家工学...

作者

  • 2篇赫冀成
  • 2篇苏志坚
  • 1篇陈进
  • 1篇李炎华

传媒

  • 1篇东北大学学报...
  • 1篇Journa...

年份

  • 3篇2010
2 条 记 录,以下是 1-3
排序方式:
Effect of Linear Electromagnetic Stirring on Behavior of Liquid Metal and Rate of Slag-Metal Interfacial Reactions被引量:1
2010年
The internal flow,free surface shape,and level fluctuation of liquid metal exposed to linear electromagnetic stirring were measured and analyzed against the background of an actual metallurgical equipment with linear electromagnetic stirring system.The desulphurization process,with or without imposition of linear electromagnetic stirring,was also studied experimentally.The changes in sulfur content of hot metal with respect to time were obtained,and the volumetric mass transfer coefficients corresponding to different stirring currents were determined.The results showed that linear electromagnetic stirring can effectively promote internal flow,effectively increase the level fluctuation,and significantly improve the kinetic condition of liquid metal.The internal flow and level fluctuation of liquid metal increase in line with the increase in electromagnetic stirring intensity.The desulphurization experiments show that linear electromagnetic stirring can significantly promote the desulphurization process of hot metal,and that the technology has wide application potential in promoting various slag-metal reactions.
LI Yan-hua SU Zhi-jian HE Ji-cheng
超声多普勒测速仪在冶金动力学研究中的应用
介绍了超声多普勒测速仪在冶金领域应用的研究现状及前景,并成功使用该测速仪对与钢液物理性质相似的低熔点合金的内部流速进行了测量。将实测值与推算值对比后发现,该仪器所测得的金属液内部流速是可靠的,其在冶金动力学研究领域有广阔...
李炎华苏志坚赫冀成
关键词:液态金属
文献传递
移动电磁场下低碳钢凝固过程枝晶破碎临界条件
2010年
为了探讨移动电磁场对低碳钢凝固过程枝晶破碎的影响,进行了移动电磁场下的0.22%~0.34%C(质量分数)低碳钢浇铸凝固实验.对不同磁感应强度下铸坯凝固组织进行了观察,考察了二次枝晶分布,凝固过程冷却速度与二次枝晶间距的函数关系.同时考察了移动电磁场对铸坯柱状晶向等轴晶转变(CET)位置的影响,并对钢凝固过程CET发生时的凝固速度和固相率进行了计算.导出了移动电磁场下合金凝固过程枝晶破碎的临界条件,并通过低碳钢作实验验证,得到了低碳钢凝固CET发生时临界固相率和液相平均流速之间的关系.
陈进苏志坚中岛敬治赫冀成
关键词:二次枝晶间距固相率
共1页<1>
聚类工具0