您的位置: 专家智库 > >

张俊杰

作品数:4 被引量:2H指数:1
供职机构:中国科学院更多>>
发文基金:国家自然科学基金中国科学院战略性先导科技专项更多>>
相关领域:理学电子电信更多>>

文献类型

  • 3篇期刊文章
  • 1篇科技成果

领域

  • 3篇理学
  • 1篇电子电信

主题

  • 2篇丙三醇
  • 2篇催化
  • 1篇修饰
  • 1篇氧化铈
  • 1篇乳酸
  • 1篇脱氢
  • 1篇激光
  • 1篇二氧化铈
  • 1篇
  • 1篇ALKALI...
  • 1篇AU
  • 1篇CATALY...
  • 1篇CEO2
  • 1篇丙醇二酸
  • 1篇催化脱氢
  • 1篇催化氧化
  • 1篇ALKALI
  • 1篇SORBIT...
  • 1篇ADDITI...
  • 1篇HYDROG...

机构

  • 4篇中国科学院
  • 2篇中国科学院大...
  • 1篇广东省石油与...

作者

  • 4篇张俊杰
  • 2篇徐杰
  • 1篇赵光华
  • 1篇于维强
  • 1篇刘玉鹏
  • 1篇路芳
  • 1篇李伟良
  • 1篇杜中田
  • 1篇蔡嘉莹
  • 1篇贾启云
  • 1篇黄义争
  • 1篇李耀棠
  • 1篇高进
  • 1篇卢锐
  • 1篇马红

传媒

  • 2篇Chines...
  • 1篇现代化工

年份

  • 1篇2020
  • 1篇2016
  • 1篇2014
  • 1篇2007
4 条 记 录,以下是 1-4
排序方式:
Effects of alkaline additives on the formation of lactic acid in sorbitol hydrogenolysis over Ni/C catalyst被引量:1
2016年
Lactic acid is produced as a major byproduct during sorbitol hydrogenolysis under alkaline conditions.We investigated the effects of two different alkaline additives,Ca(OH)2 and La(OH)3,on lactic acid formation during sorbitol hydrogenolysis over Ni/C catalyst.In the case of Ca(OH)2,the selectivity of lactic acid was 8.9%.In contrast,the inclusion of La(OH)3 resulted in a sorbitol conversion of 99% with only trace quantities of lactic acid being detected.In addition,the total selectivity towards the C2 and C4 products increased from 20.0% to 24.5% going from Ca(OH)2 to La(OH)3.These results therefore indicated that La(OH)3 could be used as an efficient alkaline additive to enhance the conversion of sorbitol.Pyruvic aldehyde,which is formed as an intermediate during sorbitol hydrogenolysis,can be converted to both 1,2-propylene glycol and lactic acid by hydrogenation and rearrangement reactions,respectively.Notably,these two reactions are competitive.When Ca(OH)2 was used as an additive for sorbitol hydrogenolysis,both the hydrogenation and rearrangement reactions occurred.In contrast,the use of La(OH)3 favored the hydrogenation reaction,with only trace quantities of lactic acid being formed.
张俊杰路芳于维强卢锐徐杰
关键词:ALKALISORBITOL
具有预补偿和畸变校正功能的激光固化快速成型设备研制
李伟良李耀棠赵光华张俊杰刘玉鹏贾启云
该项目获2004年广州市科技攻关计划装备专项经费支持,项目编号:2004Z2-D9061,项目经费下达文件:穗科条字[2004]17号。背景:在以知识经济和信息技术为特征的当今社会,制造业面临瞬息万变的市场对小批量多种产...
关键词:
关键词:激光
温和条件下Au/HY催化剂催化氧化丙三醇制丙醇二酸被引量:1
2014年
研究了不同载体负载的Au催化剂催化丙三醇水相选择性氧化制丙醇二酸.与Au/CeO2,Au/AC,Au/REY和Au/NaY催化剂相比,Au/HY上获得了高收率的丙醇二酸.在60°C和0.3 MPa氧气压力下,丙三醇转化率达98%,丙醇二酸收率为80%.表征结果表明,小尺寸的Au纳米颗粒对生成丙醇二酸有明显促进作用;反应过程中丙三醇先被催化氧化生成甘油酸,再被进一步氧化生成丙醇二酸.
蔡嘉莹马红张俊杰杜中田黄义争高进徐杰
关键词:催化氧化丙三醇丙醇二酸
CeO2修饰的Cu/AC催化丙三醇转化制乳酸的研究
2020年
采用等体积浸渍法制备CeO2修饰的Cu/AC催化剂,利用N2物理吸附、X射线粉末衍射和H2程序升温还原等表征手段对Cu基催化剂进行表征。结果表明,Cu基催化剂的主要活性组分为Cu纳米粒子;此外,CeO2和Cu之间有着较强的相互作用。在N2气氛下,以KOH为碱性添加剂,考察了Cu基催化剂在丙三醇水相催化转化制乳酸反应中的催化性能。结果表明,以CeO2修饰Cu/AC可显著提高催化剂的催化性能。同时考察了反应温度和反应时间对Cu-CeO2/AC催化剂催化性能的影响。以Cu-CeO2/AC-0.3为催化剂,在220℃下反应4 h,丙三醇转化率为100%,乳酸选择性达85.7%。
张俊杰郑家宝洪培萍麦裕良胡伟
关键词:催化脱氢二氧化铈丙三醇乳酸
共1页<1>
聚类工具0