您的位置: 专家智库 > >

刘铮

作品数:2 被引量:12H指数:2
供职机构:中南大学能源科学与工程学院更多>>
发文基金:国家自然科学基金更多>>
相关领域:动力工程及工程热物理化学工程更多>>

文献类型

  • 2篇中文期刊文章

领域

  • 1篇化学工程
  • 1篇动力工程及工...

主题

  • 1篇液滴模型
  • 1篇数值模拟
  • 1篇脱硫
  • 1篇脱硫过程
  • 1篇流体计算
  • 1篇氨法
  • 1篇氨法脱硫
  • 1篇EULER-...
  • 1篇传热
  • 1篇传质
  • 1篇值模拟

机构

  • 2篇中南大学

作者

  • 2篇刘铮
  • 2篇李立清
  • 1篇孙政
  • 1篇马卫武
  • 1篇黄贵杰
  • 1篇张纯
  • 1篇宋剑飞
  • 1篇邢俊冬
  • 1篇刘伟

传媒

  • 1篇化工学报
  • 1篇中国电机工程...

年份

  • 1篇2014
  • 1篇2010
2 条 记 录,以下是 1-2
排序方式:
固定床吸附过程传热传质耦合影响数值模拟被引量:4
2010年
To explore the coupled effect of heat and mass transfer,the coupled model of heat and mass transfer for a fixed bed adsorption process was established according to the Soret effect and the Dufour effect theory.Numerical analysis methods were adopted to discuss the influences of heat transfer coefficients,mass transfer coefficients,and the coupled effect of heat and mass transfer on the fixed bed adsorption process respectively.Results have shown that heat transfer coefficients have little effect on mass transfer.To the degree of influence on the temperature field,the greatest is the heat transfer coefficient,followed by the axial thermal conductivity,the smallest is the external heat transfer coefficient.The mass transfer coefficients have some impact on the heat transfer and the mass transfer effect caused by the temperature gradient is more obvious than the heat transfer effect caused by the concentration gradient.
李立清孙政邢俊冬刘伟宋剑飞刘铮
关键词:传热传质
多组分颗粒轨道模型氨法脱硫过程仿真研究被引量:8
2014年
将双膜理论、亨利定律、NH3与SO2间的化学反应通过自定义函数(UDF)的方法导入Fluent多组分液滴模型,计算氨法脱硫塔喷淋过程的脱硫效率。旋流烟气采用RNG k-ε模型,喷淋液滴采用颗粒轨道模型(discrete Particle model,DPM),应用PISO算法对传质、流动过程进行压力-速度耦合的非稳定计算。计算结果显示:脱硫效率计算值与实验值误差在10%以内;随喷淋液气比增大、喷淋液温度及入口烟气中SO2浓度的降低,脱硫效率升高;喷淋液初始温度从40升高至50℃时,脱硫效率从91%迅速降至80%;在脱硫塔液气比较低时,增大液气比(0.5~1.8 L/m^3)能明显提高脱硫效率(65%~93%);当进口SO2浓度从1 208升高到4 832 mg/m^3时,在塔高平面上,壁面与外塔中间区域的浓度差(300~1 050 mg/m^3)增大,不均匀性增强。Fluent传质反应模型能综合反映不同工况下脱硫塔运行状况,指导设备的优化设计。
李立清张纯黄贵杰刘铮马卫武
关键词:氨法脱硫流体计算
共1页<1>
聚类工具0