您的位置: 专家智库 > >

丁立

作品数:4 被引量:12H指数:2
供职机构:南京工业大学城市建设与安全环境学院安全工程研究所更多>>
发文基金:国家自然科学基金更多>>
相关领域:环境科学与工程金属学及工艺更多>>

文献类型

  • 4篇中文期刊文章

领域

  • 2篇金属学及工艺
  • 2篇环境科学与工...

主题

  • 2篇液氯
  • 2篇事故分析
  • 2篇离心铸造
  • 2篇
  • 1篇液击
  • 1篇事故后果模拟
  • 1篇试生产
  • 1篇气云
  • 1篇铸型
  • 1篇铸造机
  • 1篇离心铸造机
  • 1篇立式离心铸造
  • 1篇扩散
  • 1篇管线
  • 1篇管线泄漏
  • 1篇安全措施
  • 1篇安全对策

机构

  • 4篇南京工业大学

作者

  • 4篇张礼敬
  • 4篇丁立
  • 3篇陶刚

传媒

  • 1篇化工学报
  • 1篇特种铸造及有...
  • 1篇铸造技术
  • 1篇石油化工高等...

年份

  • 2篇2008
  • 2篇2007
4 条 记 录,以下是 1-4
排序方式:
一起离心铸造机铸型模具顶盖脱落事故分析及安全措施
2007年
针对一起立式离心铸造机在试运行过程中铸型顶盖脱落事故,根据流体静力学原理对金属液体进行受力分析,对模具顶盖螺栓材料进行强度校核,查找事故技术原因,提出安全预防措施,确保离心铸造安全运行。
陶刚丁立张礼敬
关键词:离心铸造事故分析安全措施
立式离心铸造机试生产事故原因分析及安全对策被引量:2
2007年
针对一起立式离心铸造机在试生产过程中铸型顶盖脱落事故,根据流体静力学原理对金属液体进行受力分析,对模具顶盖螺栓材料进行强度校核,发现事故的直接原因是顶盖螺栓强度不足,建议从设计上加强设备的本质安全,制订并严格执行安全操作规程,定期对机器设备、铸型及其紧固装置等进行检查、维护和检修。
陶刚丁立张礼敬
关键词:立式离心铸造事故分析安全对策
输氯管线爆裂事故原因分析
2008年
某公司液氯储罐充装即将结束时,发生输氯软管爆裂、液氯泄漏事故,造成多人中毒。根据液击原理,分别对关阀液击升压及液氯管道材料进行计算和强度校核,并分析事故成因。结果表明,液击引起的最高升压可达2.6 MPa,为正常工作压力(0.4 MPa)的6.5倍,接近管道材料的抗拉强度极限。急关阀门导致液击及多次(反复)液击引起金属软管的早期失效是造成该输氯管道爆裂事故的主要技术原因。因此,在化工物料管路设计时应进行液击压力计算,操作时应采取相应措施以减少液击升压现象的发生。
张礼敬丁立袁明朗
关键词:液氯液击
输氯管线泄漏事故后果模拟被引量:10
2008年
According to typical liquefied chlorine pipeline leakage,which is common in chemical production,the diffusion processes in different stages were simulated by using the Box model and Gauss puff model respectively.At the same time,the hazard area and degrees of influence were determined by using the intoxication accident consequences simulation techniques.The results showed that if 20 kg of liquefied chlorine leaked instantaneously,the heavy gas formed would change to neutral gas at 50 m to the leeward side.The hazard area could be divided into death zone,severe injury zone,slight injury zone,and breathe-in reaction zone.The death zone extended as far as 85 m to the leeward side,in which the death rate could reach up to 95%,and the duration of exposure should not exceed 10 min.The severe injury zone extended as far as 200 m to the leeward side,in which the death rate was 4%,and the duration of exposure should not exceed 60 min.The results of the simulation were in agreement with the consequences of such an accident caused practically.Therefore,it is reliable to simulate the accident results of unexpected leakage by choosing a suitable diffusion model and correlation parameters,and it is very important for supervising disaster reduction and salvage.
张礼敬丁立陶刚
关键词:液氯
共1页<1>
聚类工具0