Porphyrin-filled nanofibrous membranes were facilely prepared by electrospinning of the mixtures of poly（acrylonitrile-co-acrylic acid）（PANCAA） and porphyrins. 5,10,15,20-Tetraphenylporphyrin（TPP） and its metal-loderivatives（ZnTPP and CuTPP） were studied as filling mediators for the immobilization of redox enzyme. Results indicate that the introduction of TPP, ZnTPP and CuTPP improves the retention activity of the immobilized catalase. Among these three porphyrins, the ZnTPP-filled PANCAA nanofibrous membrane exhibits an activity retention of 93%, which is an exciting improvement. This improvement is attributed to both the strong catalase-porphyrin affinity and the possible facilitated electron transfer induced by the porphyrin as evidenced by quartz crystal microbalance （QCM） and fluorescence spectroscopy studies.
KE Bei-bei WAN Ling-shu HUANG Xiao-jun XU Zhi-kang
A novel approach for the surface modification of poly(vinylidene fluoride)(PVDF)membrane was successfully realized through alkaline treatment,UV-induced bromine addition,and followed by surface-initiated atom transfer radical polymerization(ATRP)of methyl methacrylate(MMA).Chemical changes on the PVDF membrane before and after modification were analyzed with attenuated total reflectance Fourier transform infrared spectroscopy(ATR/FT-IR)and X-ray photoelectron spectroscopy(XPS).Primary kinetic study revealed...
A glycopolymer bearing glucose residues was tethered onto the surface of polypropylene microporous membrane by UV-induced graft polymerization ofα-allyl glucoside.Concanavalin A (Con A),a glucose recognizing lectin,could be specifically adsorbed to the membrane surface.On the other hand,the membrane surface showed no recognition ability to another lectin peanut agglutinin.Moreover,the recognition complex between the glycosylated membrane surface and Con A could be inhibited by glucose and mannose solution.T...
Wettability of a solid surface is highly important to its practical application,especially for the surface that shows thermoresponsive properties.In this paper,we describe a thermo-responsive stick-slip behavior of water droplets on the surfaces of poly(N-isopropylacrylamide)(PNIPAM)-grafted polypropylene membranes.Field emission scanning electron microscope(FESEM) images elucidate that the morphology of PNIPAM-grafted membrane surface is thermo-responsive,i.e.,the surface becomes rougher above the lower critical solution temperature(LCST) of PNIPAM.On the surface of nascent polypropylene membranes,the water droplet shows a smooth motion resulting in advancing and receding water contact angles of 111° and ～65°,respectively.On the PNIPAM-grafted membrane surfaces,the water droplet shows a stick-slip pattern above the LCST,whereas it advances smoothly below the LCST.This phenomenon is reproducible and can be ascribed to the energy barriers enhanced by the shrink of PNIPAM chains above the LCST.We also find that the slip contact angle decreases from 102° to 92° after several stick-slip cycles.This decrease is attributed to the water adsorption on the grafted PNIPAM layer,which is confirmed by the continuous decrease of the receding water contact angle.
WAN LingShu,MENG XiangLin,YANG YunFeng,TIAN Jing & XU ZhiKang Key Laboratory of Macromolecular Synthesis and Functionalization,Ministry of Education
Highly ordered honeycomb-patterned polystyrene (PS)/poly(ethylene glycol) (PEG) films were prepared by a water-assisted method using an improved setup, which facilitated the formation of films with higher regularity, better reproducibility, and larger area of honeycomb structures. Surface aggregation of hydrophilic PEG and adsorption of bovine serum albumin (BSA) on the honeycomb-patterned films were investigated. Field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) were used to observe the surface morphologies of the films before and after being rinsed with water. As confirmed by the FESEM images and the AFM phase images, PEG was enriched in the pores and could be gradually removed by water. The adsorption of fluorescence-labeled BSA on the films was studied in visual form using laser scanning confocal microscopy. Results clearly demonstrated that the protein-resistant PEG was selectively enriched in the pores. This water-assisted method may be a latent tool to prepare honeycomb-patterned biofunctional surfaces.
WAN LingShuKE BeiBeiLI XiaoKaiMENG XiangLinZHANG LuYaoXU ZhiKang
Reported here is a protocol to fabricate a biocatalyst with high enzyme loading and activity retention, from the conjugation of electrospun nanofibrous membrane having biomimetic phospholipid moiety and lipase. To improve the catalytic efficiency and activity of the immobilized enzyme, poly（acrylonitrile-co-2-methacryloyloxyethyl phosphorylcholine）s（PANCMPCs） were, respectively, electrospun into nanofibrous membranes with a mean diameter of 90 nm, as a support for enzyme immobilization. Lipase from Candida rugosa was immobilized on these nanofibrous membranes by adsorption. Properties of immobilized lipase on PANCMPC nanofibrous membranes were compared with those of the lipase immobilized on the polyacrylonitrile（PAN） nanofibrous and sheet membranes, respectively. Effective enzyme loading on the nanofibrous membranes was achieved up to 22.0 mg/g, which was over 10 times that on the sheet membrane. The activity retention of immobilized lipase increased from 56.4% to 76.8% with an increase in phospholipid moiety from 0 to 9.6%（molar fraction） in the nanofibrous membrane. Kinetic parameter Km was also determined for free and immobilized lipase. The Km value of the immobilized lipase on the nanofibrous membrane was obviously lower than that on the sheet membrane. The optimum pH was 7.7 for free lipase, but shifted to 8.3-8.5 for immobilized lipases. The optimum temperature was determined to be 35 ℃ for the free enzyme, but 42-44℃ for the immobilized ones, respectively. In addition, the thermal stability, reusability, and storage stability of the immobilized lipase were obviously improved compared to the free one.
Surface glycosylation of polymeric membranes has been inspired by the structure of natural biomem-branes. It refers to that glycosyl groups are introduced onto the membrane surface by various strate-gies, which combine the separation function of the membrane with the biological function of the sac-charides in one system. In this review, progress in the surface glycosylation of polymeric membranes is highlighted in two aspects, i.e. the glycosylation methods and the potential applications of the sur-face-glycosylated membranes.
